Schneider ATV930D11N4Z Variable Speed Drive
Overview: The Schneider ATV930D11N4Z Variable Speed Drive is a state-of-the-art solution engineered for precision and efficiency in industrial motor control applications. Designed for cabinet integration, this advanced drive excels in enhancing operational performance and reliability across various sectors. With an impressive power rating of 11 kW and voltage compatibility of 380-480V, it delivers seamless control and optimization for demanding environments.
Key Features:
Advanced Control Technology: The ATV930D11N4Z incorporates Schneider Electric’s latest drive technology, providing superior control over motor speed and torque. This results in enhanced process accuracy and energy efficiency.
Cabinet Integration: Designed specifically for seamless integration into control cabinets, the drive’s compact and robust construction ensures easy installation and reliable performance in confined spaces.
IP20 Rating: With an IP20 protection rating, this drive is engineered for indoor use, providing adequate protection against dust and accidental contact, making it ideal for various industrial settings.
Wide Voltage Range: The drive supports a voltage range of 380V to 480V, making it versatile and adaptable to different power supply configurations and operational requirements.
Power Rating: At 11 kW, the ATV930D11N4Z is capable of handling demanding loads, making it suitable for a broad range of applications including pumps, fans, and conveyors.
Energy Efficiency: By optimizing motor speed and reducing energy consumption, the ATV930D11N4Z not only improves system efficiency but also contributes to significant cost savings in energy bills.
User-Friendly Interface: The drive features an intuitive user interface, allowing for straightforward setup and operation. Advanced programming options are available for customization to meet specific application needs.
Robust Design: Engineered for durability, the ATV930D11N4Z is built to withstand the rigors of industrial environments, ensuring long-term reliability and minimal maintenance.
Compliance and Safety: Adhering to international standards, the ATV930D11N4Z meets stringent safety and performance regulations, ensuring safe and reliable operation.
Applications: The Schneider ATV930D11N4Z is ideal for use in a wide array of industrial applications, including:
- HVAC systems
- Pump and fan control
- Conveyor systems
- Material handling
- Water and wastewater treatment
Benefits:
- Enhanced Efficiency: Improve energy consumption and operational efficiency with precise motor control.
- Cost Savings: Reduce energy costs and operational expenses through advanced drive technology.
- Reliability: Experience consistent performance with a robust and durable design.
Specifications:
- Model: ATV930D11N4Z
- Type: Variable Speed Drive
- Integration: Cabinet Mount
- Protection Rating: IP20
- Power Rating: 11 kW
- Voltage Range: 380-480V
Why Choose Schneider Electric? Schneider Electric is a global leader in energy management and automation, renowned for delivering innovative solutions that drive efficiency and sustainability. The ATV930D11N4Z exemplifies our commitment to excellence, offering cutting-edge technology and unparalleled reliability.
Order Now: Enhance your motor control systems with the Schneider ATV930D11N4Z Variable Speed Drive. Contact us today to place your order or to request more information.
| range of product |
Altivar Process ATV900
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| device application |
Industrial application
|
|
| device short name |
ATV930
|
|
| variant |
With braking chopper
Standard version |
|
| product destination |
Synchronous motors
Asynchronous motors |
|
| mounting mode |
Wall mount
|
|
| EMC filter |
Integrated conforming to EN/IEC 61800-3 category C2 with <= 10 m
motor cable maxi
|
|
| IP degree of protection |
IP20 conforming to IEC 61800-5-1
|
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50...60 Hz (+/- 5 %)
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
380...480 V (- 15...10 %)
|
|
| motor power kW |
11 kW (normal duty)
|
|
| motor power hp |
15 hp (normal duty)
|
|
| line current |
19.8 A at 380 V (normal duty)
|
|
| prospective line Isc |
50 kA
|
|
| apparent power |
14.1 kVA at 480 V (normal duty)
|
|
| continuous output current |
23.5 A at 4 kHz (normal duty)
|
|
| maximum transient current |
28.2 A during 60 s (normal duty)
|
|
| asynchronous motor control profile |
Constant torque standard
Variable torque standard Optimized torque mode |
|
| synchronous motor control profile |
Permanent magnet motor
Synchronous reluctance motor |
|
| speed drive output frequency |
0.1...599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
2...16 kHz adjustable
|
|
| safety function |
STO (safe torque off) SIL 3
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Modbus serial
Ethernet/IP Modbus TCP |
|
| option module |
Slot A : communication module for Profibus DP V1
|
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Can be suppressed
Not available in permanent magnet motor law Automatic whatever the load Adjustable |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01...9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Motor : thermal protection
|
|
| frequency resolution |
Display unit : 0.1 Hz
|
|
| electrical connection |
Control, screw terminal : 0.5...1.5 mm² (AWG 20...AWG 16)
|
|
| connector type |
2 RJ45 (on the control block) for Ethernet IP/Modbus TCP
|
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
10/100 Mbit/s for Ethernet IP/Modbus TCP
|
|
| exchange mode |
Half duplex, full duplex, autonegotiation for Ethernet IP/Modbus
TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| method of access |
Slave for Modbus TCP
|
|
| supply |
External supply for digital inputs : 24 V DC (19...30 V) current
<= 1.25 mA (overload and short-circuit protection)
|
|
| local signalling |
3 mono/dual colour LED for local diagnostic
|
|
| width |
155 mm
|
|
| height |
345 mm
|
|
| depth |
225 mm
|
|
| product weight |
6.9 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
Software-configurable voltage AI1, AI2, AI3 : 0...10 V DC
impedance 30 kOhm, resolution 12 bits
|
|
| discrete input number |
10
|
|
| discrete input type |
Programmable DI1...DI8 : 24 V DC (<= 30 V) impedance 3.5 kOhm
|
|
| input compatibility |
Discrete input DI1...DI8 : level 1 PLC conforming to EN/IEC
61131-2
|
|
| analogue output number |
2
|
|
| discrete output number |
2
|
|
| discrete output type |
Logic output DQ+ : 0...1 kHz (<= 30 V) DC, 100 mA
|
|
| sampling duration |
Discrete input DI1...DI8 : 2 ms (+/- 0.5 ms)
|
|
| accuracy |
Analog input AI1, AI2, AI3 : +/- 0.6 % for a temperature
variation 60 °C
Analog output AQ1, AQ2 : +/- 1 % for a temperature variation 60 °C |
|
| linearity error |
Analog input AI1, AI2, AI3 : +/- 0.15 % of maximum value
|
|
| maximum switching current |
Relay output R1 on resistive load (cos phi = 1) : 3 A at 250 V
AC
|
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1 : fault relay NO/NC electrical
durability 100000 cycles
|
|
| refresh time |
Relay output R1, R2, R3 : 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3 : 5 mA at 24 V DC
|
|
| isolation |
Between power and control terminals
|
|
| specific application |
Process
|
|
| IP degree of protection |
IP21
|
|
| motor starter type |
Variable speed drive
|
| insulation resistance |
> 1 mOhm at 500 V DC for 1 minute to earth
|
|
|---|---|---|
| noise level |
56 dB conforming to 86/188/EEC
|
|
| power dissipation in W |
51 W (natural convection) at 380 V switching frequency 4 kHz
|
|
| vibration resistance |
1.5 mm peak to peak (f = 2...13 Hz) conforming to IEC 60068-2-6
|
|
| shock resistance |
15 gn during 11 ms conforming to IEC 60068-2-27
|
|
| volume of cooling air |
103 m3/h
|
|
| operating position |
Vertical +/- 10 degree
|
|
| THDI |
<= 48 % from 80...100 % of load conforming to IEC 61000-3-12
|
|
| electromagnetic compatibility |
Electrostatic discharge immunity test level 3 conforming to IEC
61000-4-2
|
|
| pollution degree |
2 EN/IEC 61800-5-1
|
|
| environmental characteristic |
Chemical pollution resistance class 3C3 conforming to EN/IEC
60721-3-3
|
|
| relative humidity |
5...95 % without condensation conforming to IEC 60068-2-3
|
|
| ambient air temperature for operation |
50...60 °C with derating factor
|
|
| ambient air temperature for storage |
-40...70 °C
|
|
| operating altitude |
1000...4800 m with current derating 1 % per 100 m
|
|
| standards |
UL 508C
|
|
| product certifications |
UL
CSA TÜV REACH |
|
| marking |
CE
|