Schneider ATV930D30M3 Variable Speed Drive - ATV930 - 30kW - 200/240V with Braking Unit - IP21
Overview: The Schneider ATV930D30M3 Variable Speed Drive is a high-performance, reliable solution designed to provide precision control and efficiency for various industrial and commercial applications. This robust variable frequency drive (VFD) is engineered to deliver superior motor control, enhance system performance, and reduce energy consumption. With a power rating of 30kW and operating voltages of 200/240V, the ATV930D30M3 is ideal for demanding environments requiring optimal drive performance and advanced features.
Key Features:
Power and Voltage Specifications:
- Power Rating: 30kW (40HP) for substantial motor control and power management.
- Voltage Range: 200/240V, accommodating a wide range of electrical systems and ensuring compatibility with various installations.
Advanced Control and Performance:
- Variable Speed Control: Precision speed adjustment enables optimal performance across different operational requirements, enhancing overall process efficiency.
- High Dynamic Response: Advanced control algorithms provide smooth acceleration and deceleration, minimizing mechanical stress and ensuring consistent operational stability.
- Enhanced Torque Performance: Delivers high torque across a wide speed range, ensuring effective handling of dynamic loads and process variability.
Integrated Braking Unit:
- Built-In Braking System: Equipped with an integrated braking unit to manage regenerative energy, improve braking performance, and ensure safe operation under dynamic conditions.
- Energy Efficiency: Reduces energy consumption by recovering and reusing regenerative energy, contributing to overall system efficiency and cost savings.
Durability and Protection:
- IP21 Enclosure Rating: Provides protection against limited dust ingress and dripping water, making it suitable for use in industrial environments with moderate exposure to contaminants.
- Robust Design: Engineered for durability and reliability, ensuring long-term performance and reduced maintenance needs.
User-Friendly Interface and Diagnostics:
- Intuitive Display: Features a user-friendly interface with a clear LCD display for easy setup, monitoring, and adjustments.
- Advanced Diagnostics: Comprehensive diagnostic tools and fault monitoring capabilities facilitate quick troubleshooting and maintenance, minimizing downtime.
Compliance and Safety:
- Regulatory Compliance: Meets industry standards and regulations for safety and performance, ensuring reliable operation in various applications.
- Built-In Safety Features: Incorporates essential safety functions such as over-voltage protection, under-voltage protection, and short-circuit protection to safeguard both the drive and connected equipment.
Applications: The Schneider ATV930D30M3 Variable Speed Drive is suitable for a wide range of applications, including:
- HVAC systems
- Water and wastewater treatment
- Industrial automation
- Pump and fan control
- Conveyors and material handling
Technical Specifications:
- Model: ATV930D30M3
- Series: ATV930
- Power Rating: 30kW (40HP)
- Voltage: 200/240V
- Enclosure Rating: IP21
- Braking Unit: Integrated
- Dimensions and Weight: [Provide specific dimensions and weight if available]
Why Choose Schneider ATV930D30M3? The Schneider ATV930D30M3 Variable Speed Drive stands out for its advanced control features, integrated braking system, and robust construction. Its ability to deliver precise motor control and energy efficiency makes it an excellent choice for enhancing the performance and reliability of your industrial and commercial systems.
Contact Us: For more information about the Schneider ATV930D30M3 Variable Speed Drive or to request a quote, please contact our sales team or visit our website.
Keywords: Schneider ATV930D30M3, Variable Speed Drive, ATV930, 30kW Drive, 200/240V VFD, Integrated Braking Unit, IP21 Drive, Industrial Variable Frequency Drive, Precision Motor Control, Energy-Efficient VFD
| range of product |
Altivar Process ATV900
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| device application |
Industrial application
|
|
| device short name |
ATV930
|
|
| variant |
Standard version
With braking chopper |
|
| product destination |
Asynchronous motors
Synchronous motors |
|
| mounting mode |
Wall mount
|
|
| EMC filter |
Without EMC filter
|
|
| IP degree of protection |
IP21 conforming to IEC 61800-5-1
|
|
| degree of protection |
UL type 1 conforming to UL 508C
|
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50...60 Hz (+/- 5 %)
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
200...240 V (- 15...10 %)
|
|
| motor power kW |
18.5 kW (normal duty)
|
|
| motor power hp |
25 hp (normal duty)
|
|
| line current |
66.7 A at 200 V (normal duty)
|
|
| prospective line Isc |
50 kA
|
|
| apparent power |
22.7 kVA at 240 V (normal duty)
|
|
| continuous output current |
78.4 A at 4 kHz (normal duty)
|
|
| maximum transient current |
94.1 A during 60 s (normal duty)
|
|
| asynchronous motor control profile |
Optimized torque mode
Constant torque standard Variable torque standard |
|
| synchronous motor control profile |
Synchronous reluctance motor
Permanent magnet motor |
|
| speed drive output frequency |
0.1...599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
2...16 kHz adjustable
|
|
| safety function |
STO (safe torque off) SIL 3
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Ethernet/IP
Modbus TCP Modbus serial |
|
| option module |
Slot A : communication module for Profibus DP V1
|
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Not available in permanent magnet motor law
Adjustable Can be suppressed Automatic whatever the load |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01...9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Motor : thermal protection
|
|
| frequency resolution |
Display unit : 0.1 Hz
|
|
| electrical connection |
Control, screw terminal : 0.5...1.5 mm² (AWG 20...AWG 16)
|
|
| connector type |
2 RJ45 (on the control block) for Ethernet IP/Modbus TCP
|
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
10/100 Mbit/s for Ethernet IP/Modbus TCP
|
|
| exchange mode |
Half duplex, full duplex, autonegotiation for Ethernet IP/Modbus
TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| method of access |
Slave for Modbus TCP
|
|
| supply |
External supply for digital inputs : 24 V DC (19...30 V) current
<= 1.25 mA (overload and short-circuit protection)
|
|
| local signalling |
3 mono/dual colour LED for local diagnostic
|
|
| width |
226 mm
|
|
| height |
673 mm
|
|
| depth |
274 mm
|
|
| product weight |
27.3 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
Software-configurable voltage AI1, AI2, AI3 : 0...10 V DC
impedance 30 kOhm, resolution 12 bits
|
|
| discrete input number |
10
|
|
| discrete input type |
Programmable DI1...DI8 : 24 V DC (<= 30 V) impedance 3.5 kOhm
|
|
| input compatibility |
Discrete input DI1...DI8 : level 1 PLC conforming to EN/IEC
61131-2
|
|
| analogue output number |
2
|
|
| discrete output number |
2
|
|
| discrete output type |
Logic output DQ+ : 0...1 kHz (<= 30 V) DC, 100 mA
|
|
| sampling duration |
Discrete input DI1...DI8 : 2 ms (+/- 0.5 ms)
|
|
| accuracy |
Analog input AI1, AI2, AI3 : +/- 0.6 % for a temperature
variation 60 °C
Analog output AQ1, AQ2 : +/- 1 % for a temperature variation 60 °C |
|
| linearity error |
Analog input AI1, AI2, AI3 : +/- 0.15 % of maximum value
|
|
| maximum switching current |
Relay output R1 on resistive load (cos phi = 1) : 3 A at 250 V
AC
|
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1 : fault relay NO/NC electrical
durability 100000 cycles
|
|
| refresh time |
Relay output R1, R2, R3 : 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3 : 5 mA at 24 V DC
|
|
| isolation |
Between power and control terminals
|
|
| specific application |
Process
|
|
| IP degree of protection |
IP21
|
|
| motor starter type |
Variable speed drive
|
| insulation resistance |
> 1 mOhm at 500 V DC for 1 minute to earth
|
|
|---|---|---|
| noise level |
71.5 dB conforming to 86/188/EEC
|
|
| power dissipation in W |
97 W (natural convection) at 200 V switching frequency 4 kHz
|
|
| vibration resistance |
1.5 mm peak to peak (f = 2...13 Hz) conforming to IEC 60068-2-6
|
|
| shock resistance |
15 gn during 11 ms conforming to IEC 60068-2-27
|
|
| volume of cooling air |
240 m3/h
|
|
| operating position |
Vertical +/- 10 degree
|
|
| THDI |
<= 48 % from 80...100 % of load conforming to IEC 61000-3-12
|
|
| electromagnetic compatibility |
Electrostatic discharge immunity test level 3 conforming to IEC
61000-4-2
|
|
| pollution degree |
2 EN/IEC 61800-5-1
|
|
| environmental characteristic |
Chemical pollution resistance class 3C3 conforming to EN/IEC
60721-3-3
|
|
| relative humidity |
5...95 % without condensation conforming to IEC 60068-2-3
|
|
| ambient air temperature for operation |
50...60 °C with derating factor
|
|
| ambient air temperature for storage |
-40...70 °C
|
|
| operating altitude |
1000...4800 m with current derating 1 % per 100 m
|
|
| standards |
UL 508C
|
|
| product certifications |
UL
CSA REACH TÜV |
|
| marking |
CE
|