Schneider ATV930D75M3C Variable Speed Drive - ATV930 Series
Product Code: ATV930D75M3C
Power Rating: 75 kW
Voltage Range: 200/240V
Braking Unit: Without Braking Unit
Protection Rating: IP00
Overview:
The Schneider ATV930D75M3C Variable Speed Drive, part of the advanced ATV930 series, is engineered to deliver precise and reliable control of your motor applications. With a robust 75 kW power rating and designed for a voltage range of 200/240V, this drive provides exceptional performance and flexibility for demanding industrial environments. The ATV930D75M3C is built to optimize motor efficiency and enhance operational productivity with its cutting-edge technology and intuitive user interface.
Key Features:
High Performance and Efficiency: The ATV930D75M3C is designed for high-efficiency operation with advanced control algorithms that ensure optimal performance across a wide range of applications. It supports precise speed and torque control, enhancing the efficiency of your motor-driven systems.
Versatile Voltage Compatibility: This drive operates effectively within a voltage range of 200/240V, making it suitable for various industrial and commercial applications where precise voltage control is essential.
Robust Power Rating: With a substantial power rating of 75 kW, the ATV930D75M3C can handle demanding tasks and ensure consistent performance even under high-load conditions.
Advanced Control Features: The drive incorporates sophisticated control features including dynamic torque control, customizable speed profiles, and programmable logic functions. These features provide unparalleled control over your motor systems, allowing for tailored solutions to meet specific operational requirements.
User-Friendly Interface: The ATV930D75M3C comes with an intuitive user interface that simplifies setup and operation. Its easy-to-navigate controls and display ensure quick configuration and efficient monitoring of your drive's performance.
Durable Design: Although the drive is rated with an IP00 protection level, it is designed to withstand various industrial conditions and ensures reliable performance in controlled environments. For applications requiring additional protection, consider enclosures or additional protection measures.
Scalable Integration: The drive supports seamless integration with existing automation systems and can be easily integrated into various industrial networks for enhanced system connectivity and data exchange.
Applications:
The Schneider ATV930D75M3C is ideal for a wide range of industrial applications including but not limited to:
- Conveyor systems
- Pumps and fans
- HVAC systems
- Material handling
- Water and wastewater treatment
Technical Specifications:
- Power Rating: 75 kW
- Voltage Range: 200/240V
- Braking Unit: Without Braking Unit
- Protection Rating: IP00
- Mounting Type: Panel Mount
- Control Mode: V/f control, vector control
Why Choose Schneider ATV930D75M3C?
The Schneider ATV930D75M3C Variable Speed Drive offers a perfect blend of high performance, advanced features, and user-friendly operation, making it a superior choice for enhancing the efficiency and reliability of your motor control systems. Its advanced technology and versatile applications ensure that it meets the rigorous demands of modern industrial environments while providing cost-effective and energy-efficient solutions.
Get in Touch:
For more information on the Schneider ATV930D75M3C Variable Speed Drive or to request a quote, please contact our sales team or visit our website.
| range of product |
Altivar Process ATV900
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| device application |
Industrial application
|
|
| device short name |
ATV930
|
|
| variant |
Standard version
With braking chopper |
|
| product destination |
Asynchronous motors
Synchronous motors |
|
| mounting mode |
Wall mount
|
|
| EMC filter |
Without EMC filter
|
|
| IP degree of protection |
IP21 conforming to IEC 61800-5-1
|
|
| degree of protection |
UL type 1 conforming to UL 508C
|
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50...60 Hz (+/- 5 %)
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
200...240 V (- 15...10 %)
|
|
| motor power kW |
18.5 kW (normal duty)
|
|
| motor power hp |
25 hp (normal duty)
|
|
| line current |
66.7 A at 200 V (normal duty)
|
|
| prospective line Isc |
50 kA
|
|
| apparent power |
22.7 kVA at 240 V (normal duty)
|
|
| continuous output current |
78.4 A at 4 kHz (normal duty)
|
|
| maximum transient current |
94.1 A during 60 s (normal duty)
|
|
| asynchronous motor control profile |
Optimized torque mode
Constant torque standard Variable torque standard |
|
| synchronous motor control profile |
Synchronous reluctance motor
Permanent magnet motor |
|
| speed drive output frequency |
0.1...599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
2...16 kHz adjustable
|
|
| safety function |
STO (safe torque off) SIL 3
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Ethernet/IP
Modbus TCP Modbus serial |
|
| option module |
Slot A : communication module for Profibus DP V1
|
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Not available in permanent magnet motor law
Adjustable Can be suppressed Automatic whatever the load |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01...9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Motor : thermal protection
|
|
| frequency resolution |
Display unit : 0.1 Hz
|
|
| electrical connection |
Control, screw terminal : 0.5...1.5 mm² (AWG 20...AWG 16)
|
|
| connector type |
2 RJ45 (on the control block) for Ethernet IP/Modbus TCP
|
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
10/100 Mbit/s for Ethernet IP/Modbus TCP
|
|
| exchange mode |
Half duplex, full duplex, autonegotiation for Ethernet IP/Modbus
TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| method of access |
Slave for Modbus TCP
|
|
| supply |
External supply for digital inputs : 24 V DC (19...30 V) current
<= 1.25 mA (overload and short-circuit protection)
|
|
| local signalling |
3 mono/dual colour LED for local diagnostic
|
|
| width |
226 mm
|
|
| height |
673 mm
|
|
| depth |
274 mm
|
|
| product weight |
27.3 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
Software-configurable voltage AI1, AI2, AI3 : 0...10 V DC
impedance 30 kOhm, resolution 12 bits
|
|
| discrete input number |
10
|
|
| discrete input type |
Programmable DI1...DI8 : 24 V DC (<= 30 V) impedance 3.5 kOhm
|
|
| input compatibility |
Discrete input DI1...DI8 : level 1 PLC conforming to EN/IEC
61131-2
|
|
| analogue output number |
2
|
|
| discrete output number |
2
|
|
| discrete output type |
Logic output DQ+ : 0...1 kHz (<= 30 V) DC, 100 mA
|
|
| sampling duration |
Discrete input DI1...DI8 : 2 ms (+/- 0.5 ms)
|
|
| accuracy |
Analog input AI1, AI2, AI3 : +/- 0.6 % for a temperature
variation 60 °C
Analog output AQ1, AQ2 : +/- 1 % for a temperature variation 60 °C |
|
| linearity error |
Analog input AI1, AI2, AI3 : +/- 0.15 % of maximum value
|
|
| maximum switching current |
Relay output R1 on resistive load (cos phi = 1) : 3 A at 250 V
AC
|
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1 : fault relay NO/NC electrical
durability 100000 cycles
|
|
| refresh time |
Relay output R1, R2, R3 : 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3 : 5 mA at 24 V DC
|
|
| isolation |
Between power and control terminals
|
|
| specific application |
Process
|
|
| IP degree of protection |
IP21
|
|
| motor starter type |
Variable speed drive
|
| insulation resistance |
> 1 mOhm at 500 V DC for 1 minute to earth
|
|
|---|---|---|
| noise level |
71.5 dB conforming to 86/188/EEC
|
|
| power dissipation in W |
97 W (natural convection) at 200 V switching frequency 4 kHz
|
|
| vibration resistance |
1.5 mm peak to peak (f = 2...13 Hz) conforming to IEC 60068-2-6
|
|
| shock resistance |
15 gn during 11 ms conforming to IEC 60068-2-27
|
|
| volume of cooling air |
240 m3/h
|
|
| operating position |
Vertical +/- 10 degree
|
|
| THDI |
<= 48 % from 80...100 % of load conforming to IEC 61000-3-12
|
|
| electromagnetic compatibility |
Electrostatic discharge immunity test level 3 conforming to IEC
61000-4-2
|
|
| pollution degree |
2 EN/IEC 61800-5-1
|
|
| environmental characteristic |
Chemical pollution resistance class 3C3 conforming to EN/IEC
60721-3-3
|
|
| relative humidity |
5...95 % without condensation conforming to IEC 60068-2-3
|
|
| ambient air temperature for operation |
50...60 °C with derating factor
|
|
| ambient air temperature for storage |
-40...70 °C
|
|
| operating altitude |
1000...4800 m with current derating 1 % per 100 m
|
|
| standards |
UL 508C
|
|
| product certifications |
UL
CSA REACH TÜV |
|
| marking |
CE
|