Schneider ATV930U22M3 Variable Speed Drive - ATV930 Series - 2.2 kW - 200/240V - Integrated Braking Unit - IP21
Overview:
Unlock unparalleled performance and control with the Schneider ATV930U22M3 Variable Speed Drive, part of the advanced ATV930 series. Designed for superior reliability and efficiency, this 2.2 kW variable speed drive operates at 200/240V, making it ideal for a wide range of industrial and commercial applications. Equipped with an integrated braking unit and rated at IP21, it offers both enhanced safety and flexibility in various environments.
Key Features:
Variable Speed Control: Achieve precise motor control with advanced speed regulation capabilities, ensuring optimal performance and energy efficiency across diverse applications.
Power Rating: Delivers 2.2 kW of power, suitable for moderate to high-demand tasks, providing robust performance for pumps, fans, conveyors, and other machinery.
Voltage Compatibility: Operates effectively within a voltage range of 200/240V, accommodating different power supply configurations and minimizing the need for additional transformers.
Integrated Braking Unit: Features a built-in braking unit for enhanced stopping power and rapid deceleration. This integration reduces installation complexity and ensures reliable operation under varying load conditions.
IP21 Rating: With an IP21 enclosure rating, the drive is protected against solid objects greater than 12 mm and vertically falling drops of water. This makes it well-suited for indoor use in environments with limited exposure to dust and moisture.
Advanced Diagnostics and Communication: Includes comprehensive diagnostic tools and communication options to facilitate seamless integration with existing systems and provide real-time feedback on operational status.
User-Friendly Interface: Equipped with an intuitive control panel for easy setup and operation, enabling quick adjustments and monitoring of drive parameters.
Energy Efficiency: Designed to optimize energy consumption, the ATV930U22M3 helps reduce operational costs while maintaining high-performance standards.
Applications:
The Schneider ATV930U22M3 Variable Speed Drive is ideal for various applications, including but not limited to:
- HVAC systems
- Industrial fans and blowers
- Water and wastewater treatment
- Conveyor systems
- Pump control
Technical Specifications:
- Model: ATV930U22M3
- Series: ATV930
- Power: 2.2 kW
- Voltage: 200/240V
- Braking Unit: Integrated
- Enclosure Rating: IP21
- Control Type: Variable Speed
- Communication Ports: [Specify communication options if applicable]
Why Choose Schneider ATV930U22M3?
The Schneider ATV930U22M3 Variable Speed Drive stands out for its exceptional reliability, ease of use, and energy efficiency. Schneider Electric's commitment to innovation and quality ensures that this drive meets the highest industry standards, providing a dependable solution for your variable speed control needs.
Optimize Your Operations Today!
Elevate your control systems with the Schneider ATV930U22M3 Variable Speed Drive. For more information or to place an order, contact us at [Your Contact Information].
Keywords for SEO:
- Schneider ATV930U22M3 Variable Speed Drive
- ATV930 Series Drive
- 2.2 kW Variable Speed Drive
- 200/240V VSD
- Integrated Braking Unit Drive
- IP21 Rated Drive
- Industrial Variable Speed Control
- Energy Efficient VSD
| range of product |
Altivar Process ATV900
|
|
|---|---|---|
| product or component type |
Variable speed drive
|
|
| device application |
Industrial application
|
|
| device short name |
ATV930
|
|
| variant |
Standard version
With braking chopper |
|
| product destination |
Asynchronous motors
Synchronous motors |
|
| mounting mode |
Wall mount
|
|
| EMC filter |
Without EMC filter
|
|
| IP degree of protection |
IP21 conforming to IEC 61800-5-1
|
|
| degree of protection |
UL type 1 conforming to UL 508C
|
|
| type of cooling |
Forced convection
|
|
| supply frequency |
50...60 Hz (+/- 5 %)
|
|
| network number of phases |
3 phases
|
|
| [Us] rated supply voltage |
200...240 V (- 15...10 %)
|
|
| motor power kW |
18.5 kW (normal duty)
|
|
| motor power hp |
25 hp (normal duty)
|
|
| line current |
66.7 A at 200 V (normal duty)
|
|
| prospective line Isc |
50 kA
|
|
| apparent power |
22.7 kVA at 240 V (normal duty)
|
|
| continuous output current |
78.4 A at 4 kHz (normal duty)
|
|
| maximum transient current |
94.1 A during 60 s (normal duty)
|
|
| asynchronous motor control profile |
Optimized torque mode
Constant torque standard Variable torque standard |
|
| synchronous motor control profile |
Synchronous reluctance motor
Permanent magnet motor |
|
| speed drive output frequency |
0.1...599 Hz
|
|
| nominal switching frequency |
4 kHz
|
|
| switching frequency |
2...16 kHz adjustable
|
|
| safety function |
STO (safe torque off) SIL 3
|
|
| number of preset speeds |
16 preset speeds
|
|
| communication port protocol |
Ethernet/IP
Modbus TCP Modbus serial |
|
| option module |
Slot A : communication module for Profibus DP V1
|
| output voltage |
<= power supply voltage
|
|
|---|---|---|
| motor slip compensation |
Not available in permanent magnet motor law
Adjustable Can be suppressed Automatic whatever the load |
|
| acceleration and deceleration ramps |
Linear adjustable separately from 0.01...9999 s
|
|
| braking to standstill |
By DC injection
|
|
| protection type |
Motor : thermal protection
|
|
| frequency resolution |
Display unit : 0.1 Hz
|
|
| electrical connection |
Control, screw terminal : 0.5...1.5 mm² (AWG 20...AWG 16)
|
|
| connector type |
2 RJ45 (on the control block) for Ethernet IP/Modbus TCP
|
|
| physical interface |
2-wire RS 485 for Modbus serial
|
|
| transmission frame |
RTU for Modbus serial
|
|
| transmission rate |
10/100 Mbit/s for Ethernet IP/Modbus TCP
|
|
| exchange mode |
Half duplex, full duplex, autonegotiation for Ethernet IP/Modbus
TCP
|
|
| data format |
8 bits, configurable odd, even or no parity for Modbus serial
|
|
| type of polarization |
No impedance for Modbus serial
|
|
| method of access |
Slave for Modbus TCP
|
|
| supply |
External supply for digital inputs : 24 V DC (19...30 V) current
<= 1.25 mA (overload and short-circuit protection)
|
|
| local signalling |
3 mono/dual colour LED for local diagnostic
|
|
| width |
226 mm
|
|
| height |
673 mm
|
|
| depth |
274 mm
|
|
| product weight |
27.3 kg
|
|
| analogue input number |
3
|
|
| analogue input type |
Software-configurable voltage AI1, AI2, AI3 : 0...10 V DC
impedance 30 kOhm, resolution 12 bits
|
|
| discrete input number |
10
|
|
| discrete input type |
Programmable DI1...DI8 : 24 V DC (<= 30 V) impedance 3.5 kOhm
|
|
| input compatibility |
Discrete input DI1...DI8 : level 1 PLC conforming to EN/IEC
61131-2
|
|
| analogue output number |
2
|
|
| discrete output number |
2
|
|
| discrete output type |
Logic output DQ+ : 0...1 kHz (<= 30 V) DC, 100 mA
|
|
| sampling duration |
Discrete input DI1...DI8 : 2 ms (+/- 0.5 ms)
|
|
| accuracy |
Analog input AI1, AI2, AI3 : +/- 0.6 % for a temperature
variation 60 °C
Analog output AQ1, AQ2 : +/- 1 % for a temperature variation 60 °C |
|
| linearity error |
Analog input AI1, AI2, AI3 : +/- 0.15 % of maximum value
|
|
| maximum switching current |
Relay output R1 on resistive load (cos phi = 1) : 3 A at 250 V
AC
|
|
| relay output number |
3
|
|
| relay output type |
Configurable relay logic R1 : fault relay NO/NC electrical
durability 100000 cycles
|
|
| refresh time |
Relay output R1, R2, R3 : 5 ms (+/- 0.5 ms)
|
|
| minimum switching current |
Relay output R1, R2, R3 : 5 mA at 24 V DC
|
|
| isolation |
Between power and control terminals
|
|
| specific application |
Process
|
|
| IP degree of protection |
IP21
|
|
| motor starter type |
Variable speed drive
|
| insulation resistance |
> 1 mOhm at 500 V DC for 1 minute to earth
|
|
|---|---|---|
| noise level |
71.5 dB conforming to 86/188/EEC
|
|
| power dissipation in W |
97 W (natural convection) at 200 V switching frequency 4 kHz
|
|
| vibration resistance |
1.5 mm peak to peak (f = 2...13 Hz) conforming to IEC 60068-2-6
|
|
| shock resistance |
15 gn during 11 ms conforming to IEC 60068-2-27
|
|
| volume of cooling air |
240 m3/h
|
|
| operating position |
Vertical +/- 10 degree
|
|
| THDI |
<= 48 % from 80...100 % of load conforming to IEC 61000-3-12
|
|
| electromagnetic compatibility |
Electrostatic discharge immunity test level 3 conforming to IEC
61000-4-2
|
|
| pollution degree |
2 EN/IEC 61800-5-1
|
|
| environmental characteristic |
Chemical pollution resistance class 3C3 conforming to EN/IEC
60721-3-3
|
|
| relative humidity |
5...95 % without condensation conforming to IEC 60068-2-3
|
|
| ambient air temperature for operation |
50...60 °C with derating factor
|
|
| ambient air temperature for storage |
-40...70 °C
|
|
| operating altitude |
1000...4800 m with current derating 1 % per 100 m
|
|
| standards |
UL 508C
|
|
| product certifications |
UL
CSA REACH TÜV |
|
| marking |
CE
|
Schneider ATV930U22M3 Variable Speed Drive - 2.2 kW - 200/240V - With Braking Unit - IP21
- Brand: Schneider
- Product Code: ATV930U22M3
- Availability: 1000
Tags: Schneider ATV930U22M3, Variable Speed Drive, 2.2 kW Drive, 200/240V VSD, Braking Unit Drive, IP21 Variable Speed Drive, ATV930 Series, Industrial Drive, Schneider Electric Drives, Energy Efficient Drive