Introducing the Panasonic MINAS A6 MDMF502L1C8M Servo Motor
Are you in search of high-performance servo motors for your industrial automation needs? Look no further than the Panasonic MINAS A6 MDMF502L1C8M Servo Motor. With its exceptional specifications, this motor is set to revolutionize your motion control applications.
Product Description
Experience precision and power with the Panasonic MINAS A6 MDMF502L1C8M Servo Motor. This 200V motor boasts a remarkable 5000W of power, making it a reliable choice for demanding tasks that require utmost accuracy.
Product Details
- Voltage: 200V
- Power Rating: 5000W
- Product Type: Servo Motor
- Barcode: [Barcode not provided]
Frequently Asked Questions
Q1: What is a servo motor used for?
A1: Servo motors are used in various industries for precise control of position, velocity, and torque in machinery and automation systems.
Q2: Can this motor be used for industrial robotics?
A2: Yes, this Panasonic servo motor is well-suited for industrial robotics, providing the precision and power needed for efficient operation.
Genres
- Industrial Automation
- Robotics
- Engineering
Themes
- Precision Control
- High Power
- Efficiency
Conclusion
The Panasonic MINAS A6 MDMF502L1C8M Servo Motor is your gateway to unparalleled precision and power in industrial automation. Whether you're in the field of robotics or engineering, this motor is designed to meet your exacting demands. Elevate your projects to new heights with this exceptional servo motor.
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MDMF502L1C8M |
| Details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Special Order Product |
| Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Enclosure | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 176 mm sq. |
| Flange sq. dimension (Unit:mm) | 176 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 7.8 |
| Voltage specifications | 200 V |
| Rated output | 5000 W |
| Rated current (A (rms)) | 23.3 |
| Holding brake | without |
| Mass (kg) | 15.6 |
| Oil seal | with protective lip |
| Shaft | Round |
| Rated torque (N ⋅ m) | 23.9 |
| Continuous stall torque (N ⋅ m) | 26.3 |
| Momentary Max. peak torque (N ⋅ m) | 71.6 |
| Max. current (A (o-p)) | 99 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 2 in parallel |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Rated rotational Max. speed (r/min) | 3000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 58.2 |
| Recommended moment of inertia ratio of the load and the rotor | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
Permissible load
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 1666 |
| During assembly: Thrust load A-direction (N) | 784 |
| During assembly: Thrust load B-direction (N) | 980 |
| During operation: Radial load P-direction (N) | 784 |
| During operation: Thrust load A, B-direction (N) | 343 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |